Quality
Quality inspection in China: inspection types, AQL and timing
· 5 min read · BRIDGE team, Shanghai
Inspection is the last point where problems are cheap to fix. Once goods have shipped, every defect costs freight, time and often a customer. Planning a few inspections at the right moments costs a fraction of that.
Key takeaways
- Agree the quality standard in writing, against a signed reference sample, before production starts.
- Use the right inspection for the moment: before production, during production, before shipment and at container loading.
- Pre-shipment inspections are usually done when production is complete and at least most of the order is packed.
- AQL sampling tells you how many units to check and how many defects are acceptable — agree the levels in advance.
- A full (100%, piece-by-piece) inspection checks every unit. It suits small or high-value orders, and sorting a lot that failed a sampling inspection.
- Time the final payment after a passed inspection, not before.
Start with a standard everyone has agreed
An inspection can only check against something. Before production, agree a written specification and a signed reference sample with the supplier: materials, dimensions and tolerances, finish, function, packaging, labelling and any market-specific marking. Classify what counts as a critical, major and minor defect. Without this, an inspection turns into an argument.
Types of quality inspection in China
Inspections are named after the moment they happen. Inspection companies and factories often use the abbreviations below, so it helps to know them when you book one or read a report.
Before production (pre-production inspection, PPI)
A pre-production check confirms that raw materials and components match the specification and that the factory is ready. It is most useful for new suppliers, new products and materials that are hard to change later.
During production (DUPRO)
A during-production inspection, usually once part of the order has been made, catches systematic problems while there is still time to correct the rest of the run. It is valuable for large orders and long lead times.
Before shipment (pre-shipment inspection, PSI)
The pre-shipment inspection is the most common. It is generally done when production is finished and at least most of the goods are packed, so the inspector can draw a random sample from the actual shipment. It checks appearance, function, dimensions, quantity, packaging and labelling against the specification.
At container loading (container loading check, CLC)
A loading check — sometimes called a stuffing inspection — confirms that the right goods, in the right quantity and condition, go into the container, and that they are loaded and sealed properly. It closes the gap between a passed inspection and what actually ships.
Full inspection (100%, piece-by-piece)
In a full inspection every unit is checked, not a sample. It takes longer and costs more, so it is mainly used for small or high-value orders, for products where a single defect is unacceptable, and to sort a lot that failed a sampling inspection so that only good units ship.
Factory audit or product inspection?
A factory audit looks at the supplier: whether it is a real manufacturer, its equipment, capacity, processes and quality system. It is done before you place an order, as part of verifying a new supplier. A product inspection looks at your goods: one specific order, checked against your specification. Most buyers need both — an audit to choose the supplier, inspections to accept each order.
How AQL sampling works
Checking every unit is rarely practical, so most inspections use acceptance sampling based on the international standard ISO 2859-1, commonly referred to as AQL (acceptance quality limit). Its current edition was published in January 2026. The order size and an inspection level determine how many units are checked; the AQL values set how many defects of each class are acceptable in that sample.
- General inspection level II is widely used as the default.
- Critical defects — anything unsafe or illegal — are usually set to zero tolerance.
- Major and minor defects are given separate limits, agreed in advance. Tighter limits mean a stricter inspection.
- Agree the levels in the contract, so a result is a fact rather than a negotiation.
Testing that a visual check cannot cover
Some requirements need laboratory testing: chemical safety, electrical safety, food contact, materials composition and similar. Identify the standards that apply to your product and your market early, because certification and testing take time and should be planned into the schedule — not discovered at the end.
What to do when an inspection fails
- 1.Read the report with the photos, and separate isolated defects from systematic ones.
- 2.Share the findings with the supplier in writing and agree a corrective action: rework, sorting, replacement or remaking.
- 3.Book a re-inspection after the correction, and agree in advance who pays for it.
- 4.Hold the balance payment until the goods pass.
Common questions
What does a pre-shipment inspection in China check?
A random sample drawn from the finished, packed order is checked against your specification: quantity, appearance and workmanship, dimensions, function and safety tests that can be done on site, packaging, labelling and markings. The report lists every defect found, with photos, and a pass or fail result against the agreed AQL levels.
What is the difference between a full inspection and an AQL inspection?
An AQL inspection checks a statistical sample and accepts or rejects the whole lot based on the defects found in it. A full inspection checks every unit, so it finds and removes individual defective pieces — at a higher cost and over a longer time.
When should I book the inspection?
Book a pre-shipment inspection for when production is complete and at least most of the order is packed, and leave enough time before the shipping date for corrective action and a re-inspection if the goods fail.